Slow Windows XP startup problems

2010-12-07  来源:本站原创  分类:OS  人气:113 

Today, open the computer actually slow to die. The main phenomenon is that after booting into the desktop, the desktop does not fully show that the local connection, the input method that did not boot up.
In general, the computer system services a slow start because of the open issues. So he used the rain forest with the wind before a key optimization services get the next. The requirements for the basic computer can. Ago are lazy to use this directly, though this time not. So its time to find it. Put all the services and re-allocation of Zhuge Kan About Automatic, Manual, prohibited.
Basically tried. Add searching to solve the problem.
Some of the role of the Internet in this regard came in an article chain placed reference:
-------------------------------------------------- ----------
Windows XP slow start how to do?

Often heard such complaints from computer users: how self-test after I turned on the computer screen has been black, only XP interface to half a day there? Why my computer into the system so slow? Turn the scroll bar is not more than a dozen laps into the system yet. Why is my XP desktop appears within minutes after the click on any program that does not respond? These problems can be attributed to Windows XP starts slow. What to do to speed up the system startup speed?

To solve the problem of slow XP startup, we must first look at the system boot process. Windows XP boot process can be divided into five steps: first, pre-start: First of all the computer power for self-test by the BIOS (the basic input output system) scans the hardware and complete the basic hardware configuration, and then read the hard drive's MBR (master boot record) to check the hard disk partition table to determine the boot partition, and boot the operating system on the partition boot sector into memory in the Executive, where the implementation of NTLDR (the operating system loader) file. The second step, start: first to the beginning of, NTLDR will the processor from real mode to 32-bit protected mode. Then read the BOOT.INI file. The third step. Loading the kernel: kernel boot process starts loading XP NTOSKRNL.EXE. This file is located under the installation folder Windows2000/XP SYSTEM32 folder. Subsequently, the Hardware Abstraction Layer (HAL) is loaded the boot process to complete this step. The fourth step, initialize the kernel: the kernel is initialized, NTLDR will transmit control Windows2000/XP kernel, which began to load and initialize the device driver, and start the WIN32 subsystem and WINDOWSXP services. The fifth step is the user logged in, log in, XP will continue to configure the network equipment and user environment. Finally, the boot along with the music system and we are familiar with the desktop, Windows XP has finally completed the long startup process.

Understanding of the XP startup process, we can take measures to expedite the targeted launch speed.

1, the prohibition did not use the peripheral

In front of the boot process by understanding that we know, XP will automatically scan at startup hardware, so if some of the peripheral is disabled in WinXP, can effectively reduce the system need to start the redeployment of the number of peripheral drivers to speed up the system Start speed. If your computer does not have USB devices, in the "Device Manager - Universal Serial Bus controllers" will disable all USB devices. This method can make your XP boot time by about fifteen seconds. Secondly, if you do not have multiple hard drives, you can also ban certain IDE devices to speed up the startup speed. Approach is: Right-click "My Computer - Properties", then click the "hardware" then click "Device Manager", in which the open "IDE ATA / PATA controller" (slightly different with different chips), and respectively to the primary and secondary IDE channel, select the "Advanced Settings", where to find the "current transfer mode" for "not applicable" to a (this is idle corresponding IDE channel), will the "Device Type" is set to " No, "can be identified. Also note: Due to the default system will automatically read the drive, the drive will start testing, if placed on a CD-ROM drive, it will automatically read, then read the multimedia CD-ROM if it is the time it takes will be longer the same time extend the computer's startup. It is proposed that we usually remember the time you are finished take out the disc.

2, the procedure to reduce load at startup

Many people probably have this feeling: XP startup speed of the initial system installation is also relatively fast, but with the increasing number of software installation, system start-up speed will become slower. This is because many software itself added to the startup program, so that the boot that takes a run and greatly reduce the startup speed, but also consumes a large amount of system resources. For these proceedings, we can use the System Configuration Utility Msconfig them excluded from the Startup group. Select "Start" menu in the "Run" command in the "Run" dialog box, type "Msconfig", Enter will pop up "System Configuration Utility" dialog box, select one of the "Start" tab, the option tab lists the items loaded at system startup and sources, look carefully at whether each item loaded automatically, otherwise clear the check box before the item, the item loaded less the faster start. Suggests that in addition to retain the input method (in the start-up projects for ctfmon) and anti-virus monitoring procedures (such as RavTask), the other all are prohibited to run automatically at startup.

3, manually set the IP address

As already mentioned, XP system will automatically detect whether the computer boot after the joint into the LAN, but users are generally stand-alone Internet access, and basically set up the network connections are automatically obtain IP address. So since the system in order to assign an IP address of the machine will search for DHCP server, but the average user will not configure. This results in each boot, the system will spend a long time to search for DHCP server to obtain IP address or services until the timeout will stop, even during this period came to the desktop, double-click the procedure and no reflection. This is reflected in many of the user using the Windows XP desktop after the entry of a "crash" 10 seconds of the problem! In fact as long as the "local connection" to assign an IP address manually can solve this problem simply, to avoid the automatic Windows XP boot time network detection, thus speeding up the start. Specific practices are as follows: Right-click on the "My Network Places" - select properties, into the window right-click "Local Area Connection" - select properties, double click here "Internet Protocol (TCP / IP)", select "Use the following IP address" and then Enter an IP address (eg:, subnet mask, default. (And you do not have any conflicts on the Internet, this address is only used in the LAN) so that the system will quickly find that searching again and quickly enter the system IP.

4. Off topic clean out the desktop

Many friends like to put on their desktop a nice background, such as a star of their favorite photos and the like. However, there is a nice price, that is, consuming large amounts of memory, while there are too many icons on the desktop as well. Because the system every time you start to show the desktop, you first need to check whether to enable the theme will be loaded if it is found that many of the themes to eat a lot of memory so that (in addition to many users produce their own theme is not perfect, after use a lot of compatibility issues caused by system failures.) At the same time the system will find and verify the validity of the desktop shortcut, so the more efficient way, the longer it takes to verify. Usually suggest that you try not to use the theme, set up a beautiful wallpaper on it. Desktop shortcut and then categorized into a special folder easy to manage and speed up the launch Competition.

More about speeding up Windows XP boot speed of several methods, but in the actual process of using computers, but also take into account some other factors. Such as the now popular trojans, viruses, rogue plug-ins, malicious code, etc., will greatly reduce the system's boot speed. In addition, the operation of the user's a lot of bad habits can lead to slow down XP's start. Other computer hardware such as the configuration is also a certain degree of impact on system startup. Because of these factors are too complex and usually difficult to identify the computer novice, it is recommended to download a "computer expert in 2009" (Download:, this problem can be at any time consult experts in this area.
-------------------------------------------------- ---------

Although it is Win 7 times, but I believe in many home computer users, or XP system, installed it, but many times we just entered the system in the boot interface, something are not open, we have to wait about a minute before open, then to how to solve it?

Symptoms: Starting just entering the system interface, something are not open, we have to wait about a minute to open.

The solution:

I. First, the virus database update antivirus software, a comprehensive anti-virus, to eliminate the virus causes. What? An anti-virus software, you do not!? - Unless you are old bird (text fields and then skip ^_^), prawns and it is recommended to install. What? Pirated, not upgrade!? Do not even ask this question, they want to do!

Second, the Start → Run, type msconfig → OK. In the open system, the system configuration program where some of the important services and start the program shut down, restart the computer.

Third, go to "My Computer" - Tools - Folder Options - View - abolish the "automatically search for network folders and printers," the check.

Fourth, in the Windows XP desktop system will boot into a temporary standstill for some time, when you start any program will not respond, this is because Windows XP's DHCP Client service is assigned IP address for the card, the system will be temporarily stalled for some time. Solve this problem, as long as the "Control Panel → Network Connections", the right-click "Local Area Connection" icon, then select Properties, Properties in the pop-up window (pictured) of "General" tab, select the list "Internet Protocol (TCP / IP)" item, then click "Properties" button. Properties in the pop-up window, select "Use the following IP address" option, and in the "IP address" and "Subnet Mask" enter, respectively "" and "", finally click OK exit the setup window.

Start → Settings → Network Connections → Right-click the "local connection" → Properties → Double-click "Internet Protocol (TCP / IP)" → If the IP address is empty, then, click on "Use the following IP address" IP address and subnet mask specified. Such as the IP address can be set to 192.168.0.X (X is any value between 1-255), subnet mask can be set to → OK → OK.

Fifth, clear the prefetch directory, enter C: \ WINDOWS \ Prefetch folder, the file extension pf all deleted, you can restart
-------------------------------------------------- -----------------------------

When the machine starts slow, but wait until the system is fully starts very smooth. Self-study look at that, in fact, after the computer from the POST to complete before the system begins to load the desktop is normal speed and relatively smooth, the problem is that the computer starts to start loading the desktop to the desktop loading process to complete this section in. After practice, found that: most of the computer starts slowly, are slow in loading the desktop the stage.
Well, that characterize the problem, then the essence of the problem is it? Will now play the role of system logs out:

This is just my computer log of the boot process. By analyzing the log can see the desktop system from the beginning to load the following error has occurred


This computer is configured as a member of the group, not a member of the domain. Netlogon not running this configuration service.

For more information, see Help and Support Center at

Service Control Manager
Due to the following error, Network DSDM service failed to start:
File name, directory name or volume label syntax is incorrect.

For more information, see Help and Support Center at


Can not start DCOM Server: {4F7C9975-ECA1-4190-B0EB-E37BC5E40893}. Error:
"System can not find the path specified."
When you start the command:
"D: \ Program Files \ qq \ TXPlatform.exe"-Embedding

For more information, see the Help and Support Center at

The third of nine DCOM server error occurs, a single process to slow down the system starts almost exactly 50 seconds, plus the error of the entire system before starting the process was delayed several third

Answers you need to get to the Control Panel → Administrative Tools → Event Viewer to see the system log, where to find the speed of the crux of your boot, and then prescribe the right medicine to enhance the system startup speed.

Solution Tip:

Take the example above that

First solve the DCOM server error, this should be because I deleted some of the components caused by the error. Know, this file does not exist, or the program components cited above ID failed, so press the Start "to run" regedit, search in the registry contains "4F7C9975-ECA1-4190-B0EB-E37BC5E40893" the contents of the re- Mountain rough out, the problem can be resolved.

The next service issues can begin, "Control Panel" Administrative Tools "to find the appropriate service in the services of starting off to be his

  • Slow Windows XP startup problems 2010-12-07

    Today, open the computer actually slow to die. The main phenomenon is that after booting into the desktop, the desktop does not fully show that the local connection, the input method that did not boot up. In general, the computer system services a sl

  • Switch: Windows XP startup problems under the Oracle 10g EM solve small mind 2010-09-11

    Transfer from:

  • SQL Server is installed on windows xp sp3 problems and solutions 2010-10-12

    I: install the sqlserver reinstall xp sp3 on the installation program to configure the server fails, refer to the server error logs and C: \ WINNT \ sqlstp.log Resolution: 1 to C: \ Program Files \ Microsoft SQL Server folder, delete the whole. 2, ru

  • windows xp startup problem solving missing hal.dll file 2011-01-15

    Today when my wife's computer started hal.dll missing problem, to study for an afternoon. There are many online solutions, but will not work. Finally, this method is good: Boot from your CD and follow the directions to start Recovery Console. Then: A

  • Let Windows XP more stable system 2010-08-04

    1, Win XP restore damaged system files if the Windows XP system files damaged by viruses or other reasons, we can restore Windows XP installation disk files that are damaged. Specific ways: in the Windows XP installation disk search corrupted files,

  • [Windows] Raiders Daquan 6 --------- Windows XP FAQ finishing 2010-06-02

    [I am using Windows XP system, will use any means to improve the boot speed? ] Use Microsoft's "Bootvis" software can effectively improve the Windows XP boot speed. This tool is available inside Microsoft, designed to enhance the Windows XP boot

  • At present, the most effective methods - make your pirated Windows XP into Genuine 2009-09-25

    How to verify legitimate piracy crack, remove the annoying Microsoft lock asterisk have been troubled by the many users of pirated! Of course, in order to combat piracy, Microsoft is also gone to great pains to genuine update upgrade verification pro

  • windows xp system CMD command Encyclopaedia (1) 2010-06-04

    About entries cmd-cmd.exe-Process Information Process File: cmd or cmd.exe Process Name: WindowsCommandPrompt Description: cmd.exe is a Microsoft Windows system, command-line program. similar to Microsoft's DOS operating system. cmd.exe is a 32-bit c

  • Daquan CMD command windows xp system 2010-06-18

    About entries cmd-cmd.exe-Process Information Process File: cmd or cmd.exe Process Name: WindowsCommandPrompt Description: cmd.exe is a Microsoft Windows system, command-line program. similar to Microsoft's DOS operating system. cmd.exe is a 32-bit c

  • emctl start dbconsole startup problems 2010-09-21

    emctl start dbconsole startup problems C: \ Documents and Settings \ Administrator> emctl status dbconsole Environment variable ORACLE_SID not defined. Please define it. C: \ Documents and Settings \ Administrator> set oracle_sid = testdb Microsoft

  • Close Windows XP.2003.Vista and Windows2008 Data Execution Prevention 2010-11-25

    Windows XP SP2 operating system, added more than a "Data Execution Prevention", this feature can prevent the intrusion of some viruses and some problems caused by the collapse of the applications, but some applications (especially some of the ea

  • Ubuntu10.04 and WINDOWS xp dual-boot sequence settings 2011-01-10

    Although for a long time ubuntu, but have never used, is finally want to use the one with the result a pair of problems, solutions to problems down the blog to use I installed off a dual system, for the 20G to ubuntu, but found the default boot ubunt

  • Close Windows XP.2003.Vista and Data Execution Prevention Windows2008 2010-11-25

    Windows XP SP2 operating system over a new "Data Execution Prevention", this feature can prevent the intrusion of some viruses and some of the problems caused by the collapse of the applications, but some applications (especially some of the ear

  • Under Windows XP with qemu virtual 2010-12-17

    --- ubuntu Preparation: Operating system: Windows XP SP3 Emulator: QEMU ~ qemu-win / System iso: ubuntu-10.04-desktop-i386.iso (I previously downloaded the desktop version of ubuntu with the mirror)

  • How to Run Windows XP 2011-01-22

    1, shielding the network sharing If we are not in the unit's computer local area network, then the network has been enabled sharing in fact, are not useful, it is there it will drag the system start-up speed; as much as possible in order to improve s

  • Detailed Windows XP System Service 2011-03-05

    To properly manage and configure system services, we must first make sure you have the appropriate permissions, otherwise you can not change some settings. Therefore the most convenient way is to use the Administrator group user. Changes in service s

  • Windows XP services that must be prohibited 10 2009-07-20

    Many Windows services are double-edged sword, and will bring a lot of bad security. This paper introduces the 10 services, suggest that you definitely want to disable, in addition to the prohibition of more than ten recommendations for user reference

  • How to install IIS - WINDOWS XP installation under IIS Tutorial 2009-09-29

    Installation conditions: Windows XP operating system + system installation CD-ROM Other notes: windows2000 installation of IIS and IIS is installed under Windows2003 can refer to the course, more or less the same Installation steps: 1, insert the win

  • Microsoft Windows XP: the legend of immortal 2010-03-17

    Original Source: Foreign media reports, at present, Microsoft itself has a problem, or specifically, is formed by the three conflicts as a major problem: 1, Windows XP too successful, but only their own succes

  • vmware network configuration examples of two windows xp host linux 2010-02-26

    vmware network configuration examples of two windows host + linux guest Author: tenry (Yunqing (2005-03-24) Note: many of my friends asked to host ping unreasonable situation, please check the host in the firewall settings, most of the windows xp sp2