Configuration under Linux and Win VncServer under the Vnc client

2010-08-09  来源:本站原创  分类:OS  人气:197 

VNC was originally developed by the AT & T is a system for remote management software. Its mode of operation similar to the now common under Windows Remote Desktop, of course, their qualifications than the older Windows's Remote Desktop. Under the VNC software in Windows have RealVNC so.
Of course, Linux systems do not support the Windows Remote Desktop Login, then how are we going to use a Windows laptop to manage a Linux server then?
Download page:
http://www.realvnc.com/products/download.html
http://www.onlinedown.net/soft/45175.htm

The author also uploaded a Win installer under the VNC Viewer (free registration), Download: http://download.csdn.net/source/1080853
First of all, we will certainly consider SSH, SSH server installed in Linux, then log on to Windows to use puTTY management (on puTTy use and download, go to this page: win control under Linux SSH tools pietty ).
But now, we are not satisfied just use the command line, we also want to use GUI interface. Then:
1, the Linux system to install VNC Server, most Linux distributions have a VNC Server with the release package. Just choose to install on it.
2, in Windows, install the VNC client to RealVNC example, VNC client called VNC Viewer. VNC is relatively simple to use, enter the client's IP, then VNC will connect, and then pop up the password box enter your password. There is no problem on connected.
3, configure Linux VNC Server.
(1) start the VNC service, through puTTY to log SSH server, assuming that the user named test.
login as: test
[Test @ MyServer's password:
[[email protected] ~] $ / etc / init.d / vncserver start
Starting VNC server: no displays configured
(2) run the vncserver command,
if the first configured VNC Server, VNC will be asked for login password to use. You can also use vncpasswd later to change your password.
[[email protected] ~] $ vncserver
You will require a password to access your desktops.
Password: 123456
Verify: 123456
xauth: creating new authority file / root / .vnc / .Xauthority
New 'xok.la.localdomain: 1 (test)' desktop is xok.la.localdomain: 1
Creating default startup script / root / .vnc / xstartup
Starting applications specified in / root / .vnc / xstartup
Log file is / root / .vnc / xok.la.localdomain: 1.log

(3) At this point you can use VNC Viewer in the Windows registry of the <br /> enter the server address: 192.168.0.64:1
And then prompt for password, enter the password you just set like a, like 123456
Note: IP addresses behind: 1 means that the top Linux VNC set Display No. Each running a vncserver will create a multi-Display, Display No it will also add one.
At a time when you can log on, but the login interface is the X term to see the interface, not the normal X Window interface, we have to modify the configuration, so that the use of X Window
(4) modify the configuration file / root / .vnc / xstartup, so the same content with the following:
[email protected] . vnc] $ cat xstartup
#! / Bin / sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec / etc/X11/xinit/xinitrc
[-X / etc / vnc / xstartup] & & exec / etc / vnc / xstartup
[-R $ HOME / .Xresources] & & xrdb $ HOME / .Xresources
xsetroot-solid grey
vncconfig-iconic &
xterm-geometry 80x24 +10 +10-ls-title "$ VNCDESKTOP Desktop" & twm &

(5) Save the file, enter the terminal in puTTY vncserver, to open a new VNC Display
[email protected] ~] $ vncserver
New 'xok.la.localdomain: 1 (test)' desktop is xok.la.localdomain: 2
Starting applications specified in / root / .vnc / xstartup
Log file is / root / .vnc / xok.la.localdomain: 2.log

(6) log back on using VNC Viewer
Under the VNC Viewer Win download (including the registration code included): http://xok.la/file/2008/11/ha_vnc-e4_2_9-x86_win32.rar .
Enter the server address: 192.168.0.64:2.
Then prompted for a password, such as 123456.
Behind the Display No server address is under subsection (5) step the results of running vncserver command to the.
New 'xok.la.localdomain: 1 (test)' desktop is xok.la.localdomain: 2.
So is the Display No 2, do not forget the colon Oh Canada.
And then you see the interface you want instead.
Later if the server restarts, log on to re-enter after the vncserver. If the server has been switched, the no.
If you want to kill the vncserver process executable vncserver: 1 kill, 1 that display the ID number.
Original link: http://xok.la/2008/11/linux_vncserver_win_client.html

相关文章
  • Configuration under Linux and Win VncServer under the Vnc client 2010-08-09

    VNC was originally developed by the AT & T is a system for remote management software. Its mode of operation similar to the now common under Windows Remote Desktop, of course, their qualifications than the older Windows's Remote Desktop. Under the VN

  • vncserver configuration under linux vnc client and win the next 2010-02-24

    - Begin vnc remote desktop - NOTE: start the information from the server log which should be the desktop that [the first time the desktop 1] 1, look at the server started yet? [Root @ 10 first] # ps-ef | grep vnc root 6608 6567 0 21:38 pts / 0 00:00:

  • Linux installation and vncServer FTPServer apache tomcat installation 2010-05-13

    1, download the Linux operating system pre-prepared apache and tomcat JDK64_Linux bit and JDK32_Linux Download Remote Desktop Connection software (client) vnc viewer with the TightVNC viewer Download SSH Client 2, the basic installation to install th

  • The whole process of configuration under Linux ftp 2010-05-28

    In the configuration under Linux Ftp Summary: 1, create a new user in Linux, the command is as follows: # Useradd username 2, set a password for the username, the command is as follows: # Passwd username # Set the password: password 3, testing the va

  • linux and win partition format Xiangjie 2010-08-30

    linux and win partition format Xiangjie win partition format, there are three commonly used, namely, FAT16, FAT32, NTFS format. In the Linux operating system, there Ext2, Ext3, Linux swap, and VFAT four formats. FAT16: As a file name, FAT (File Alloc

  • Detailed installation and configuration under linux vsftp 2010-10-14

    Detailed installation and configuration under linux vsftp 1, run the command yum install vsftpd Specific details are as follows: (If you can not update, you first configure access to the Internet, I have a document called CentOS in VMware, how to net

  • under the VNC configuration of linux (reprint) 2010-10-29

    1, see if there is equipment VNCserver [Root @ mylab ~] # rpm-qa | grep vnc vnc-4.1.2-14.el5 # client software vnc-server-4.1.2-14.el5 # server-side software, and if not, use rpm or yum install 2, open the vncserver service [Root @ mylab ~] # service

  • under the VNC configuration of linux (reproduced) 2010-10-29

    1 to see if there are installed VNCserver [Root @ mylab ~] # rpm-qa | grep vnc vnc-4.1.2-14.el5 # client software vnc-server-4.1.2-14.el5 # server-side software, and if not, use rpm or yum install 2, open the vncserver service [Root @ mylab ~] # serv

  • ssh server configuration under linux 2011-03-12

    ssh server configuration under linux SSH server: Since telnet is not very safe, so I need to remotely control an online service to my Linux host, then it should be how to do it! ? The best way of course, is a more secure online mechanism for programs

  • Installation and configuration under Linux tomcat 2011-03-16

    Installation and configuration under Linux tomcat (1), the official website to download Apache apache-tomcat-6.0.29.tar.gz file. (2), extract and unpack Enter the command: tar-zxvf apache-tomcat-6.0.29.tar.gz In the directory under apache-tomcat-6.0.

  • Memcached installation and configuration under Linux 2011-01-27

    Memcached installation and configuration under Linux Home http://www.danga.com/memcached Download: http://danga.com/memcached/download.bml Download file memcached-1.2.6.tar.gz tar zxvf memcached-1.2.6.tar.gz . / Configure - prefix = / usr/local/memca

  • Mysql installation and configuration under Linux getting started 2011-06-01

    Mysql installation and configuration under Linux getting started

  • 轻易实现基于linux或win运行的聊天服务端程序 2014-10-19

    对于不了解网络编程的开发人员来说,编写一个良好的服务端通讯程序是一件比较麻烦的事情.然而通过EC这个免费组件你可以非常简单地构建一个基于linux或win部署运行的网络服务程序.这种便利性完全得益于mono这些年来的不停发展.下面介绍通过EC这个组件如何通过短短十来分钟的时候内就能实现一个聊天室通讯服务程序. 在实现一个网络通讯程序的时候需要定义一个通讯协议,但EC已经集成了基础的协议功能,只需要根据交互的数据定义消息类型即可(EC提供两种序列化对象描述分别是protobuf和msgpack).

  • VNC configuration under Linux 2011-07-26

    1, VNC to start / stop / restart # Service vncserver start / stop / restart Close specific vncserver command: vncserver-kill: 1 vncserver-kill: 2 2, set a password to root user login, then enter vncserver # Vncserver and enter the password, if not pr

  • 在Linux系统中安装和使用VNC 2010-12-03

    经常使用Linux系统,大部分情况下都是在命令行状态下进行远程维护和管理,如果需要用到图形环境,该用什么工具进行连接维护管理呢?日常使用windows系统维护时都是用pcanywhere或远程桌面进行远程连接进行操作,那Linux下有没有类似pcanywhere的软件吗?答案是当然有了,那就是VNC,一个可以与pcanywhere相媲美软件. 下面就让我来介绍我在Linux下的安装和使用过程吧. 系统要求:要使用VNC,那当然是你的Linux系统使用的是图形环境,也就是说安装系统的时候安装了Xw

  • Under the configuration in linux jdk1.5 + tomcat + idea + svn 2010-08-30

    This article Internet search for non-original system, if any infringement, I immediately removed, please inform Linux operating system in use recently feeling very challenging ~ ~ both have installed the software or uninstall the software under the c

  • [Change] PHP development environment configuration LAPM [LINUX System] 2010-04-09

    The so-called LAPM is actually Linux + Apache + PHP + Mysql shorthand, in fact, only these are not enough, the saying goes, better to change plans quickly, It's true, but told him to LAPM it here for the time being. Since it is a web site, in additio

  • DNS configuration under Linux 2010-05-13

    1, DNS Introduction DNS is the Domain Name System, it can convert the IP address of the domain name; no DNS, visit the Web site, it must be so hard to remember similar 202.96.134.163 number to access. Provide DNS services that computer, that is, DNS

  • Installation and Configuration of linux on telnet 2010-05-25

    I am using centos5, install telnet. Step One: Install yum install telnet Confirmed by y, to continue the installation until the installation is complete. Step two: Change / etc / xinetd.d / telnet configuration file inside. service telnet ( flags d =

  • Telnet function configuration under Linux 2010-06-28

    According to online information, and practice my linux installation, configuration, follow these steps: 1, into the / etc / xinetd.d / directory, if there is no telnet file, the next machine I have krb5-telnet file 2, copy the krb5-telnet file, renam